Catia v5 section view series#

The last method we will look at is editing a standard section view line to include an offset for the cut. This allows the section view to project without unfolding, resulting in an exact replica of the section view created using the built-in offset tool.

In this case, we do not want the incorrect dimensions to confuse our machinist, so we will edit the sketch for the section line and convert it into construction geometry. There may be cases where you want the section line to unfold. This is because the vertical jog line is 25 mm long. The overall length, as well as the locating dimension for the slotted pocket are now 25mm longer than they were previously. This can be problematic, especially when adding dimensions to the view. Notice how the overall length of this section view is now longer than the overall length of the parent view. This will create a section view that is not aligned to the parent view. Unfortunately, there is also an unsightly extra line in the section view where the vertical offset line is.Д¬hoosing вЂCreate a standard section viewвЂ™ will вЂњunfoldвЂќ the section line, even where it is parallel to the direction of the cut. The section view is projected normal to the cutting line, or parallel to the direction of the cut. SolidWorks opens a dialog asking us what kind of section view we are trying to create.Д¬hoosing вЂCreate legacy foreshortened viewвЂ™ will give us almost the same result we got when we created the line using the built-in tool. Now, we ctrl+select each line, and the choose the Section View command. With the lines sketched, we can add relations (and dimensions, if we want the extra cowbell) to add intelligence to the sketch. Using the line command, we can sketch three lines where we want the section line to cut through the part LetвЂ™s look at creating an offset section view from a pre-defined sketch.

Catia v5 section view series#

You can also sketch a series of lines to use as a section view cutting line to create an offset section view. Be sure to hover the mouse over the side of the jog point you want to offset, and click once more to place the offset line.Д¬lick the check mark when the cutting line shortcut menu appears again, and now you can place your offset section view! вЂ¦and click once more to start the offset. Click once on the line to place the starting point for the jogвЂ¦ To create an offset section using the built-in tool, simply start the section view command and place the initial cutting line.ДЄs soon as we click to drop the cutting line, a shortcut bar pops up, asking if we want to modify the cutting line.Д¬hoosing вЂSingle OffsetвЂ™ allows us to add a jog to the section line. LetвЂ™s look at using the automated functionality first. You can also edit an existing straight cutting line. You can use the offset functionality built into the Section View command, or you can create a sketch that includes an offset to use as a cutting line. There are several ways to create offset section views in a SOLIDWORKS drawing.

We will use an offset section to circumvent the need for multiple section views. Because the center of the hole and the slotted pocket are not coplanar, we would have to use multiple standard sections to detail both of these features. We want to use section views to show the details of the machined features of the part. We will start with a top view and an isometric view of the part, a mounting fixture. This article will discuss the different ways we can create these powerful drawing views in SOLIDWORKS. What may sometimes require two or even three linear section views can sometimes be accomplished in a single offset section view. Double-click to end the cutting profile creation.Offset section views in SOLIDWORKS Drawings allow the user to create efficient, informative sections of a model. If desired, you can also click Offset Section Cut. How do I get the space analysis toolbar in Catia?Д¬reating an Offset Section View / Cut In the Drawing window, click Offset Section View in the Views toolbar ( Sections sub-toolbar).How many axis can be created in a single sketch?.What is the difference between split and trim in Catia?.What is the difference between detail view and quick detail view in Catia?.What is the use of cut part by sketch plane in Catia?.

How do I create a detail view in Catia?.